If you are building, buying a lifestyle block, or tired of water restrictions, sooner or later you face the same choice: connect to town supply, drill a bore, rely on tank water — or use a mix. There is no single right answer for every Franklin property. The right choice depends on where your land is, how much water your household and stock need, and what you want to spend now versus over the next twenty years. This guide lays out both sides honestly.
Town supply — simple, steady, but not always available
Town (reticulated) water is treated, tested and delivered at pressure. You pay a connection fee where the network reaches your boundary, plus ongoing water charges. For homes in Pukekohe, Drury’s growing subdivisions and Papakura, it is usually the simplest option.
Strengths — Treated and monitored water quality, with no filters or UV for you to maintain.
Reliable pressure for modern homes, and no pump or tank to service.
Watch out — Not available on every rural road — extending a main to a remote boundary can be very expensive.
Ongoing water bills, and summer restrictions can still apply.
Bore water — your own supply, your own responsibility
A bore taps groundwater below your property. With a good bore, a correctly sized pump and proper filtration, many Franklin farms and lifestyle blocks run their whole property — house, stock, irrigation and garden — without a water bill. Bore water around Franklin can be high in iron, manganese or hardness depending on location, so testing comes before equipment, every time.
Strengths — No ongoing water charges, and generous supply for stock, gardens and irrigation.
Independent of town restrictions and network outages.
Watch out — Up-front cost for drilling, pump, filtration and UV treatment.
You own the maintenance: pumps wear, filters need changing and water quality should be tested regularly.
A bore is not guaranteed — depth and yield vary, even between neighbours.
Do not forget tank water in the mix
Many Franklin properties do best with a blend. Roof tank water can supply the house, while a bore handles stock and irrigation. Others use town supply for drinking and a bore or tank for the garden and farm. Blending often costs less than forcing one system to do every job, and it gives you a back-up when one supply is being serviced.
Five questions that decide it for most properties
- What reaches your boundary? is town water actually at your boundary, and what is the real connection quote — not just the estimate?
- How much water do you really use? a family home uses far less than a home plus stock, irrigation and a rental or minor dwelling.
- What is the local water like? has a nearby bore been tested for iron, hardness, pH and bacteria? Neighbour results are a clue, not a promise.
- What does each option cost over 20 years? compare connection + 20 years of water bills against drilling + pump + treatment + servicing. Bore often wins over time — but only if the bore is good.
- How hands-on do you want to be? some owners love being self-sufficient; others want to never think about water again. Both are valid — be honest about which one you are.
One practical step before you commit: get the water tested and get both options quoted properly. Decisions made on guesses — about depth, yield or connection cost — are the ones that become expensive.
